Adjuster Estimates

Tags - Popular | FAQ  

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 02/02/2007 3:03 AM by  adjyurclaim
Which Training School?
 11 Replies
Sort:
You are not authorized to post a reply.
Author Messages
brighton
Member
Member
Posts:139


--
11/22/2006 4:16 PM

    With all the training schools out there, which schools do you feel offer the most for the hard earned money you will spend? I see folks wanting to get into the business or want to increase their knowledge to be better adjusters.

    It would be beneficial for these folks to have a good idea which schools provide a solid skills/training school versus those that are in it for the money and are not in it to instruct and train which you find out after you get there and you money is already spent.

    The last time I was at a formal school was Vale when it was still in Blairsville, PA (you have to be older than time to remember when they were in Blairsville)

    Rocke Baker
    0
    JimGary
    Member
    Member
    Posts:470


    --
    11/22/2006 5:21 PM
    I'll bet there are as many different opinions out there as there are schools. Vale is obviously the school everyone knows and I have heard good and bad about their program. I would guess it all depends on the amount of training needed. If you need a full start to finish training program then spend the money on Vale or one of the other 3 week schools. If you have limited experience but need a little "adjuster" training, find a more economical school.

    Myself, I  was a staff auto adjuster and had some property scoping experience, I felt very comfortable with a one week course. I have found several instances where some of the thing I learned were not exactly right, but little common sense overcame that. I have had freinds that have gone to the 2-3 day courses. I don't see how a new adjuster can learn enough in 3 days to even begin. Maybe it is a good start to see if you have the math skills, and then go on to more serious training, but I would go ahead spend the money for more serious training. This career is not going to be cheap to get into and training is not an area you want to skimp on.

    Now that I have taken a definate stand on nothing, I will add one more thing. Always know the class will have all the knowledge of the instrusctor and all the habits, good and bad of the instructor. Use your own common sense and if something seems wrong, question it until you are satisfied with the outcome.

    JWG
    I know the voices aren't real, but sometimes they're right!
    0
    JEngland
    Guest
    Guest
    Posts:2


    --
    11/26/2006 9:48 AM
    I just finished the three week property adjusting course at Vale National near Dallas, Tx.  I have about 25 years in the business, but have handled mostly liability cases and some hurricanes.  Vale is the right choice for anyone.  The name commands respect from every Insurance Company out there.  If you have that on your resume, you will stand out from those who don't.  They will teach everything you need to know and give you the confidence to handle any property claim that comes along.
    0
    Jud G.
    Advanced Member
    Advanced Member
    Posts:509


    --
    11/28/2006 1:02 PM

    JEngland, I couldn't have said it better.

    Type "training" in the search space in the following link: http://www.catadjuster.org/Home/Arc...spx.  Here, you will find quite a few opinions on various schools out there.

    IMHO, a combination of Vale and an AICPCU designation on the Training portion of your resume is a winning combination for perking the interest of most Staff and Independent Property interests.

    0
    Breck
    Guest
    Guest
    Posts:2


    --
    12/16/2006 10:38 AM

    Hi Newby’s.

     

    Wondering about training, and looking for a good course. I just completed the 3 week Property Adjusting course in Fresno at Vale National.  Vale training is highly regarded by carriers and IA firms alike. I’ve written a 3 part report on my experiences there.

    Week One

    I'm attending @ Vale West in Fresno, CA. There were 9 students expected to attend this class but 5 didn’t show up so just 4 students in the class, holiday season I suppose.
    My instructor for this 1st week is Gene Hensley a 34 year veteran adjuster and Vale’s longest term instructor with 16 years. The 1st week has been dedicated to studying insurance policies. We studied the 1991 HO 3 policy for the 1st three and a half days. Each day we go over parts of the policy, definitions, coverage’s, exclusions etc and there is a great workbook that follows along and clarifies the policy. The policy is discussed virtually line by line. We’ve completed approximately 32 written projects dealing with the policy sections in the last 4 days. Each morning we take a 10 question quiz that is graded. Mid-day yesterday, the 4th day, we started going over the differences in the 2000 HO 3 versus the 91 version and discussed the other HO policies, the DP or Dwelling Fire Policies and the various endorsements. This morning we take the main policy exam until mid-day then go over some of the commercial policies briefly.
    The two remaining weeks will concentrate on estimating property damages and will be instructed by Neil Robertson.

    Week Two
    This is my second report on the Vale adjusting course and it’s almost the end of the 2nd week.  After week 1, studying policy, we have a different instructor, Neil Robertson, teaching construction of and identification of all of the products used to build a typical house and damageability and reparability of those products. We start each day with a 10 or 11 question, graded, quiz on what was discussed the previous day.  We then study several areas of building products then go out to the ‘typical house’ built in the warehouse, look at damages to those products that have been staged by Vale’s staff.   Neil gives us a mock claim assignment and scope outline.  We do our measuring/scope notes and go to the computer lab and write an estimate.  The 1st 3 estimates were not graded, now all estimates are going to be graded and count toward the final grade.  The computer lab has computers loaded with all of the normally used estimating programs.  Since I’ve used Xactimate quite a bit I opted to work my claims with IntegriClaim to learn another program.  After lunch we study more building products then go the ‘house’ get another ‘claim’ and complete another estimate in the computer lad to complete the day.  The two estimates done each day are to be turned in the next day so you can look them over in conjunction with the notes you’ve taken that day and the manual.  If needed, you can correct the estimates on a break before submitting them to Neil for grading.  Tomorrow morning, Friday, we will take a 25 question weeks-end exam covering the week’s studies.  The exam tomorrow will be mostly T or F or multiple-choice, but there will also be some estimating calculations to work out
    Monday was all framing components, floor, walls and roofs (stick framed and trusses) and included sheathings for those systems. Tuesday we did interior plasters, drywall, textures, paint and wallpaper.  Wednesday was stair systems and related parts and how to measure carpeting on stairs. We then did trim/millwork and cabinets/countertops. Today was floor coverings, starting with wood and all of the variations through laminates then carpet and pad then vinyl (sheet, VA and VC).  We basically did tile floors with tile countertops yesterday.  With each product is discussion on how it reacts to probable losses and what methods can be used to repair IF repair is possible, how to estimate that product and all of the related terminology.
    The 1st week, policy we started at 8:30 am, took breaks about every hr. went to lunch @ 11:30 for an hour and a half and finished around 3:30 pm except for Friday, test day, we finished @ 11:30 for the day.  We have approximately the same schedule this week except we usually knock off @ more like 4:30 pm Mon. – Thur. Tomorrow we’ll also finish up around mid day.  .
    The instructor, Neil, is great.  He was a manager with AAA of  N. California for many years and was company liaison with the carriers preferred contractors.  He knows the construction and products inside out and backwards and has managed adjusters for a long time so he can relate what is expected by management and file reviewers on the estimates.  He’s also funny and keeps the class entertaining and moving along.
    Well I’d better start reviewing for the test tomorrow.  I’ll post again at the end of next week, the final week.  It will be all about exteriors and roofs.

    Week Three

    Well, I finally finished the 3 week Vale Property Adjusting course today.

    I think I wrote the last update last Thursday night. We took our weeks-end exam the next Friday morning, that covered all the information learned through that, the second week, interior materials.  After the exam Friday morning we studied doors and windows and wrote a couple more estimates related to those and included other interior items. The Vale house has several types of doors and windows, each with different finishes, through-out the rooms.  For that matter, the Vale house has varieties of each type of building materials interior and exterior.  Monday we started exterior materials, possible, probable and improbable damages to those materials, repair options - if any, terminology and how to properly measure and estimate for each.  Monday was masonry, including concrete, block wall, brick etc.  Tuesday was sidings, wood including bevel, lap and plywood (like T 1-11), then vinyl, metal (like aluminum), cement based sidings and stucco.

    Wednesday was all about roofing materials for shedding roofs and flat roofs starting with the most common roofing, 3 tab asphalt, then other asphalt roofing materials, wood shingles/shake. Then some of the more common flat roof materials such as modified bitumen and roll roofing and how to tell all of these when you see them.  I don’t think I’ve mentioned it but throughout all of the instruction Neil has samples of the materials that he’s discussing and passes them around the class.  Throughout these two weeks, when appropriate, we do a lot of math with blackboard questions and examples of the proper methods of measuring areas related to the different materials, like roof and gable areas, for instance.  When there are shortcut methods of measuring Neil imparts them to you.  I’ve taken an average of 6 pages of notes per day during his classroom instructions and have added those to the tab sections in the 3 ring manual that is given to each student.  As I’ve mentioned, each morning we’ve started the day with a 10-11 question quiz, that usually includes 1 or 2 questions of math and quantity measuring for the products/materials studied the prior day.  We also do two estimates for “claims” related to those materials out in the Vale house and then in the computer lab.  All of these quizzes and estimates are graded and become a part of your final grade. Yesterday was another short quiz in the AM then the ‘Final Estimate’ that incorporated much of what we have learned over the last two weeks.  Neil told us his goal for the class was to have everyone knowledgeable enough with building material and comfortable enough with our selected estimating software that we could easily write $8,000 to $10,000 residential dwelling estimates.  He surmises that most, larger estimates we’ll encounter will probably be more of those same items.  The Final Estimate came in right around $9,200 and incorporated damage in numerous rooms with a lot of line items required.  Today we took the 2nd, and last, of the two week-end exams to complete the course. It had around 18 questions. 

    I understand why Vale is such a highly regarded school by the carriers and IA firms.  They are very through and @ least the instructors here in Fresno really try hard to make sure everyone Gets-It.  I can’t say enough about what a great instructor Neil Robertson is as well as funny and entertaining.  If you’re going to go to Vale try and do the Fresno school with Neil, you’ll be glad you did.  The other great benefit of coming here is all of the stuff to do around Fresno. Yosemite is 50 minutes north, Sequoia National Park and National Forest is about 60 miles to the East the Pacific is about 2 hours either northwest towards the Bay area or the same southwest to Paso de Robles and the drive on Pacific Coast Hwy is between, with beaches all along the way.  There are great vineyards and orange farms all around here.  Well signing off on the Vale adventure.

     

    Kit  England

    0
    WannaBeACAT
    Guest
    Guest
    Posts:2


    --
    12/17/2006 9:28 PM
    I want to be a CAT Adjuster! I am considering different schools and want to know if there is anyone that has been to LCS or Texas All Lines? If so, PLEASE let me know what you think of those. I am also looking at Vale and U.S. Staffing. Even if you haven't been to LCS or Texas All Lines, but know something about them, please let me know.
    0
    brighton
    Member
    Member
    Posts:139


    --
    12/17/2006 10:03 PM
    WannaBeACAT

    I suggest that you read the Forum Archives about becomming a CAT adjuster before investing money and time. As a great number of relatively new adjusters found out this year, there has to be work in order to make any money. No storms means no pay. It also has threads on becomming an adjuster, the pitfalls of working for firms that have no intention of paying you what is due you, the honest firms that will do everything in their power to make sure you get paid and how much you need in reserve to survive on before any payment come in.

    Vale Tech has the best reputation of them all. Tech Core, if still in existence was Allstates training school that sometimes opened up to the public. There are "schools out there that promise you the moon", but can't deliver. Vale only says they will teach the basics of proper estimating of building damage, auto damage estimating or boat estimating. They will not promise you any work as no training school should ever make that promise.

    Can you make a decent living? Yes. But remember, you foot all the bills be it hotels, meals, travel, equipment, ect. At the end of the run, after all that is paid for is what you make. Long hours required. Good luck.
    Rocke Baker
    0
    jtarter
    Guest
    Guest
    Posts:19


    --
    12/17/2006 10:16 PM
    I took an Xactimate class with All Lines, and I was totally disappointed. 80+ students and only two instructors. It was a total waste of my time and money. I took the same class with USStaffing and it was great.
    0
    nwest
    Guest
    Guest
    Posts:13


    --
    12/18/2006 9:37 AM
    I took the UNT Xactimate class in Tampa last month...6 students...It really helped with efficiency and was well taught...if you feel comfortable with Xactimate and you are efficient, I would not recommend the intro class...Very good intro class.
    0
    WannaBeACAT
    Guest
    Guest
    Posts:2


    --
    12/18/2006 11:34 AM
    Thank you nwest, jtarter and brighton! I appreciate your input. I am well aware of the start-up and recurring cost. I have a relative in the industry that has done very well. He has shared with me the pros and cons of this business and, believe it or not, I am still interested! This is such a great site and a great place to share ideas and experience. I appreciate all of your input and would still love to hear from others. I'm currently leaning toward US Staffing.
    0
    JJ308
    Guest
    Guest
    Posts:7


    --
    01/22/2007 12:09 AM

    Wannabe,

    We're in a similiar situation. I went to Wardlaw in Waco, Texas for my TAL class and their Intro to Property Adjusting class. I was very happy with the training I received. While I have no experience in the industry, I have been around the block enough times to know when someone is doing their best to do their job. Everyone I encountered at Wardlaw fits that description, and they were all friendly, down-to-earth types to boot.

    0
    adjyurclaim
    Guest
    Guest
    Posts:1


    --
    02/02/2007 3:03 AM

    I also can't stand those large class sizes.  You always get a few people that holds the rest of the class up.  I recently took an xactimate24 course from a guy just north of Dallas.  He  offers 1 to 1 training.  I was able to learn at my own pace.  It was a great experience.  His website is www.learnxactimate.com  

    0
    You are not authorized to post a reply.


    These Forums are dedicated to discussion of Claims Adjusting.

    For the benefit of the community and to protect the integrity of the ecosystem, please observe the following posting guidelines: 
    • No Advertising. 
    • No vendor trolling / poaching. If someone posts about a vendor issue, allow the vendor or others to respond. Any post that looks like trolling / poaching will be removed.
    • No Flaming or Trolling.
    • No Profanity, Racism, or Prejudice.
    • Terms of Use Apply

      Site Moderators have the final word on approving / removing a thread or post or comment.